Repair Procedures: Replacement
WARNING: This page is about a different car, the 2019 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
[LHD]
- Disconnect the negative (-) battery terminal.
- Remove the crash pad lower panel.
(Refer to Body - "CRASH PAD LOWER PANEL ")
- Remove the driver's side shower duct (A) after loosening the screw.
- Remove the brake pedal.
(Refer to Brake System - "BRAKE PEDAL ")
- Disconnect the connector and then remove the blower motor after loosening the screws.
- Install in the reverse order of removal.
[RHD]
- Disconnect the negative (-) battery terminal.
- Remove the crash pad lower panel.
(Refer to Body - "CRASH PAD LOWER PANEL ")
- Remove the driver's side shower duct (A) after loosening the screw.
- Disconnect the connector and then remove the blower motor after loosening the screws.
- Install in the reverse order of removal.