Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Clutch switch harness connector | 4 (LHD)/1 (RHD) (signal) | Chassis ground | - | Approx. 12V |
|
Clutch switch harness connector | 2 (LHD)/3 (RHD) (ground) | Chassis ground | - | 0V |
Good
- Go to "VERIFICATION OF REPAIR " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the Clutch switch and go to "VERIFICATION OF REPAIR " procedure.