Repair Procedures: Replacement
WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Put on gloves to prevent hand injuries.
NOTE:
- When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
- Take care not to scratch the body surface.
- Remove the tail trunk lid trim.
(Refer to Trunk Lid - "TRUNK LID TRIM ")
- Disconnect the connector (A) and cable (B) and then loosen the bolt and remove the trunk lid latch (C).
- To install, reverse the removal procedure.
Information
- Make sure the tail gate locks/unlocks and opens/closes properly.
- Adjust the tail gate alignment.
- Make sure the connectors are connected in properly.