LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Engine Control System (HEV)) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
    G13436605Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the accelerator position sensor after loosening the mounting nuts (A).

    Accelerator pedal sensor mounting bolt: 

    12.7 - 15.7 N.m (1.3 - 1.6 kgf.m, 9.4 - 10.6 lb.ft)

    G13436606Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals