LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Control System) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Cleaning
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Cleaning

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ETC Module.

    (Refer to Engine Control System - "ETC SYSTEM ")

  2. Keep the ETC module plate (A) open.
    G13044218Courtesy of KIA MOTORS AMERICA, INC.
  3. Lean the pollutant in the throttle body with a soft cloth moistened with cleaning fluid.
    G13044219Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • Do not spray cleaning fluid directly onto ETC. Use a lint free cloth moistened with cleaning fluid.
    • Be careful not to clean the coating fluid around the shaft. If coating fluid is removed, idling control failure might occur by foreign substance inflow or excessive air leakage.
  4. After cleaning, re-install the ETC module and then perform the ETC module learning procedure.

    (Refer to Engine Control System - "ETC System" - ADJUSTMENT )

scientia non olet · About LEMON Manuals