Repair Procedures: Installation
WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not reuse the injector fixing clip.
CAUTION:
- Install the component to the specified torque.
- Note that internal damage may occur if the component is dropped. In this case, inspect the component before installation.
CAUTION:
- Apply engine oil to the injector O-ring.
- Do not reuse the injector O-ring.
CAUTION:
- Do not reuse the bolt.
CAUTION:
- When inserting the injector, be careful not to damage the injector tip.
- Do not reuse the high pressure fuel pipe.
CAUTION:
- Do not reuse the support disc.
- Do not reuse the injector rubber washer.
- When replacing the rubber washer, the rounded edge (A) should face the cylinder installation area and the angulated edge (B) should face the injector body.
CAUTION:
- Do not reuse the combustion seal.
- Install in the reverse order of removal.