LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Control System) >> Canister Close Valve (CCV) >> Repair Procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the CCV connector.
  3. Measure resistance between the CCV terminal 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

  5. Disconnect the vapor hose connected with the canister from the CCV.
  6. Connect a vacuum pump to the nipple.
  7. Ground the CCV control line and apply battery voltage to the CCV power supply line.
  8. Apply vacuum and check the valve operation.

    Specification:  Vacuum maintained

scientia non olet · About LEMON Manuals