Monitor GDS Data: Notes
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
- Connect GDS to Data Link Connector (DLC).
- Ignition "ON" & engine "OFF".
- Select "Current Data" mode and monitor "Inhibitor switch" parameter.
- Change a shift lever from P-range to D-range.
- Is the Inhibitor switch value changed in specification?
YES
- P070600 can be happened When Shift Cable alignment is not correct between TGS Lever and Transmission Range Sensor. so Do not replace "Inhibitor Switch" and Check the Alignment of Shift Cable.
NO
- Go to "Shift cable alignment Inspection " procedure.