LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Fuel Delivery System) >> Repair Procedures >> Release Residual Pressure In Fuel Line
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Release Residual Pressure In Fuel Line

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • There may be some residual pressure even after "Release Residual Pressure in Fuel Line" work, so cover the hose connection with a shop towel to prevent residual fuel from spilling out before disconnecting any fuel connection.
  1. Turn the ignition switch OFF and disconnect the battery (-) cable.
  2. Remove the fuel pump fuse (A).
    G12598591Courtesy of HYUNDAI MOTOR AMERICA
  3. Connect the battery (-) cable.
  4. Start the engine and let idle, and then turn the ignition switch OFF after the engine has stopped on its own.
  5. Disconnect the battery (-) cable, and then install the fuel pump fuse.
  6. Connect the battery (-) cable.
  7. Delete the Diagnostic Trouble Code (DTC) related the fuel pump fuse with the GDS.
CAUTION:
  • When removing the fuel pump fuse, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.

spilling out before disconnecting any fuel connection.
scientia non olet · About LEMON Manuals