LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Soul EV Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C1656: CAN Signal Error Cluster >> Verification Of Repair >> Verification Of Vehicle Repair
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Verification Of Vehicle Repair

After a repair, it is essential to verify that the fault is corrected.

  1. After connecting KDS select "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear recorded DTC using KDS.
  3. Drive the vehicle within DTC "Enable conditions" in "General information".
  4. After selecting "Diagnostic Trouble Codes (DTC)" mode and check if DTC is recorded again.
  5. Are any DTCs recorded?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is operating to specification at this time.