LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2019 >> Stinger GTS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go ISG System - 3.3L >> Schematic Diagrams >> Operating Condition For The ISG Function >> Auto Stop Or Auto Start Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Stop Or Auto Start Condition

If all of the below conditions are satisfied

Component State Remark
ISG OFF Switch OFF ISG OFF switch indicator lamp ->OFF
Engine Coolant Temperature Over 30°C (86°F)  
Brake vacuum Below -35kPa  
Drive door, Seat belt, Hood Closed  
EMS state
(TPS/CKP/CMP/WTS/Vehicle speed signal)
Satisfied DPF Regeneration prohibited
A/C System Satisfied  
Battery sensor
[SOC: Over 78% Temperature: 2-55°C(35.6 -131°F)]
Satisfied  
ISG related part error Does not occur  
Vehicle speed Entry the below Okph after Over 8kph Prohibition the ISG System before 8kph
Accelerator pedal OFF Engine auto stop condition
Brake switch ON Engine auto stop condition
OFF Engine auto stop condition
Gear state N (Neutal)/D Engine auto stop condition
R/1/2 Engine auto stop condition
NOTE: In congested areas, if the driver wishes to stop the vehicle and change lever from D→N, the ignition will turn OFF.