Verification Of Vehicle Repair
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
After repair, it is essential to verify if the faults have been corrected.
- Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
- Clear the DTC.
- Test the vehicle according to the DTC Prerequisite Condition in DTC Information.
- Using the GDS, see if the DTC returns.
- Did the same DTC return?
YES
- Go to the applicable troubleshooting procedure.
NO
- The system performs in accordance with the specifications at this time.