Repair Procedures: Installation
WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Install the component with the specified torque.
- Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
- Install in the reverse order of removal.
- Supplement the engine coolant.
(Refer to Engine Mechanical System - "COOLANT ")
- Reset the ECM adaptive values after replacing the ETC.
- Perform the ETC learning procedure.
(Refer to ETC (Electronic Throttle Control) System - "ADJUSTMENT ")