LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 102 (Blind Spot Detection System (HEV)) >> Blind Spot Detection Unit >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Place the RH and LH radar sensors on each side to get ready for installation.
  2. Install the radar sensor to the bracket correctly (distinguish RH & LH) with mounting screws.
    CAUTION:
    • The shapes of the LH and RH blind spot detection units are different. Therefore, take notice when installing the blind spot detection units.
    • Radar Sensors must be closed up against the bracket completely.
    • After mounting radar sensors, check for looseness.
  3. Install the rear bumper cover.
  4. Connect the negative (-) battery terminal.
scientia non olet · About LEMON Manuals