Repair Procedures: Removal
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Remove the air cleaner assembly and air intake hose.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Remove the engine wiring.
- Remove the vacuum pipe mounting bolts (A) and make a gap by moving the bracket.
- Disconnect the engine coolant temperature sensor connector (B).
- Remove the engine coolant temperature sensor (C).CAUTION:
- Note that engine coolant may be flowed out from the water temperature control assembly when removing the sensor.
- Fill with engine coolant.
(Refer to Engine Mechanical System - "COOLANT ")