LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Optima S >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Heater System) >> Auto Defogging Actuator >> Repair Procedures >> Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the main crash pad assembly.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

  3. Disconnect the connector (A) and then remove the auto defogging actuator (B) after loosening the mounting screws.
    G12606301Courtesy of HYUNDAI MOTOR AMERICA
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals