LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Sedona LX >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Transaxle Control Module (TCM) >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Perform the oil pressure characteristics backup procedure using the KDS when replacing with a new TCM.
    1. Click the "Oil-pressure Characteristics Back Up & Input (TCU Replacement)".
      G13044407Courtesy of KIA MOTORS AMERICA, INC.
    2. Check the condition and then click the "OK".
      G13044408Courtesy of KIA MOTORS AMERICA, INC.
    3. Click the "BackUp".
    G13044409Courtesy of KIA MOTORS AMERICA, INC.
  2. Disconnect the battery negative terminal.
  3. Remove the TCM by loosening nuts after disconnecting the TCM connector (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G13044410Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals