Repair Procedures: Removal

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.

Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
Remove the engine side cover (A).

Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the ECM Connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM bracket assembly after loosening the mounting bolt (A) and nuts (B).
ECM mounting bolt/nut:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Remove the ECM(B) after loosening the mounting nuts (A).
ECM bracket mounting bolt/nut:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.