LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Control System - 3.3L) >> Injector >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition.
  2. Disconnect the injector connector.
  3. Measure resistance between the injector terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification  : 1.35 - 1.38 [20°C (68°F)]

scientia non olet · About LEMON Manuals