LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2020 >> Telluride LX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the battery.

    (Refer to Body Electrical System - "BATTERY ")

  3. Remove the air cleaner assembly.

    (Engine Mechanical System - "Air cleaner") 

  4. Disconnect the crankshaft position sensor connector (A).
  5. Remove the mounting bolt (B), and then vertically remove the sensor from the transaxle housing.

    Crankshaft Position Sensor mounting bolt: 

    6.8 - 9.8 N.m (0.7 - 1.0 kgf.m, 5.0 - 7.2 lb.ft)

    G13310015Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals