Visual Inspection
WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Procedure
- Ignition "OFF".
- Check for proper installed condition of PDW sensor.
- Remove any dirt or contamination on/and around PDW sensor area.
- Check for correct type of sensor installation.
- Check for any damage or distortion of sensor and sensor bracket.
- Check the PDW sensor.
Good
- Go to "Wiring Inspection " procedure.
No Good
- Repair as necessary and then go to "VERIFICATION OF REPAIR " procedure.