Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnect the battery negative (-) terminal.
- Disconnect the Boost Pressure Sensor (BPS) connector (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Remove the BPS (A) by removing the mounting bolts.
Tightening torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2-8.7 lb-ft)
 Courtesy of KIA MOTORS AMERICA, INC.
|