LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Rio LX >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System >> Water Temperature Sensor (WTS) >> Repair Procedures >> Inspection >> Component Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection

  1. Turn ignition switch OFF.
  2. Remove the WTS.
  3. After immersing the thermistor of the sensor into engine coolant, measure resistance between WTS terminals 1 and 3.
  4. Check that the resistance is within the specification.

    Specification  : Refer to "SPECIFICATION ".

scientia non olet · About LEMON Manuals