LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Seltos S, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Coupling Assembly) >> Pressure Sensor >> Repair Procedures >> Inspection >> Measure The Resistance Of Pressure Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Measure The Resistance Of Pressure Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the pressure sensor connector.
  3. Measure resistance between sensor terminal and terminal.
  4. Check the measured resistance. (Refer to table)
    Terminal Resistance
    PIN 2 - PIN 3 2.755 - 4.133 kΩ
    PIN 1 - PIN 3 1.892 - 2.838 kΩ
    PIN 1 - PIN 2 1.714 - 2.838 kΩ
scientia non olet · About LEMON Manuals