LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2021 >> Telluride EX, 4WD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Inspection

  1. Connect the KDS to the vehicle's data link connector (DLC).
  2. Check for DTCs and repair according to the DTC guide.
  3. Check the power supply voltage provided to the fuel pressure sensor (FPS).

    Specification  : 5V

    G13310181Courtesy of KIA MOTORS AMERICA, INC.
  4. Check the voltage provided to the fuel pressure sensor (FPS) at idle.

    Specification  : 1.9 - 3.2 V

    G13310182Courtesy of KIA MOTORS AMERICA, INC.
  5. Check the fuel pressure in the low fuel line.

    (Refer to Fuel Delivery System - "FUEL PRESSURE TEST ")

scientia non olet · About LEMON Manuals