October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Monitor KDS Data
| Inspection Condition |
Inspection Procedure |
Reference |
- Ignition "ON".
|
- Connect KDS to Data Link Connector (DLC).
- Refer to
"LIFT AND SUPPORT POINTS
" and lift vehicle with suitable lift.
- Operate vehicle or system in accordance with enable condition in DTC detecting condition.
- Monitor selected parameters shown below in "Current Data" with KDS.
|
Fig.1 |
 Courtesy of KIA MOTORS AMERICA, INC.
|
Good
- Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet.
- Repair as necessary and then Go to "VERIFICATION OF REPAIR " procedure.
No Good