LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2022 >> Sorento S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Automatic Transaxle Control System (HEV)) >> Position Sensor >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Shift transmission to "N" range and turn ignition OFF.
  2. Remove the electronic shift actuator.

    (Refer to Automatic Transaxle Control System - "ELECTRONIC SHIFT ACTUATOR ")

  3. Disconnect the position sensor connector (A).
    G13576359Courtesy of KIA MOTORS AMERICA, INC.
  4. After disconnecting the connector, remove the position sensor (A) by removing the bolts.
    G13576360Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals