July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit Inspection

G13335283

Courtesy of KIA MOTORS AMERICA, INC.

G13335284

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Reference
Inspection Condition	Connector	Terminal	Connector	Terminal	Reference
Ignition "ON".	Battery sensor connector	1 (LIN line)	Chassis ground	-	Figure 1 below
Ignition "ON".	Battery sensor connector	2 (sensor +)	Chassis ground	-	Figure 1 below

G13335285

Courtesy of KIA MOTORS AMERICA, INC.

Good

Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF REPAIR " procedure.

No Good

Carefully re-do this troubleshooting guide steps.
If no problems were found with the circuits or connectors, replace the battery sensor and go to "VERIFICATION OF REPAIR " procedure.