DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Rationality check	Poor connector connection Open or short circuit in K-line circuit Faulty the SCU Faulty the IBU
Enable Condition	Ignition "ON" Auxiliary battery voltage is more than 10V
Threshold Value	SCU address/checksum/state/length/ID error occurred or IBU not responding IBU-SCU communication timeout or communication retry (over 10 times) IBU is not learning (neutral) and No IBU Pending msg
Fail Safe	Gear shift limit (R/N/D)
Detecting Time	Immediately
MIL ON Condition	-