Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnect the battery negative (-) terminal.
- Disconnect the intake middle lock control solenoid connector (A)
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Remove the intake middle lock control solenoid (A) after loosening the mounting screws.
Tightening Torque:
8.8 - 9.8 N.m (0.9 - 1.0 kgf.m, 6.5 - 7.2 lb.ft)
 Courtesy of KIA MOTORS AMERICA, INC.
|