Road Test
CAUTION:
DO NOT activate cruise control system when vehicle is in low gear or Reverse, or system may be damaged.
- Start engine. Press cruise control on/off switch. Accelerate to 30 MPH (50 KM/H), and press SET/ACCEL switch. Immediately release switch and remove foot from accelerator pedal. Vehicle should maintain speed at which switch was operated.
- Press and hold SET/ACCEL switch. Vehicle should accelerate smoothly until switch is released. When switch is released, vehicle should maintain new set speed.
- Momentarily press SET/ACCEL switch. Vehicle speed should increase 1.0 MPH (1.6 KM/H) each time switch is tapped.
- Press RESUME/DECEL switch. Cruise control should disengage. Allow vehicle to slow to about 35 MPH (55 KM/H), then momentarily press RESUME/DECEL switch and remove foot from accelerator. Vehicle should smoothly accelerate to previously set speed. Using accelerator, increase vehicle speed. Release accelerator. Vehicle should return to previously set speed.
- Press brake pedal. Cruise control should disengage. Press RESUME/DECEL switch. Vehicle should return to previously set speed.
- Press RESUME/DECEL switch, and let speed drop to less than 26 MPH (42 KM/H). Press RESUME/DECEL switch. Cruise control system should remain disengaged.
- With vehicle speed at about 28 MPH (45 KM/H), press SET/ACCEL switch. Cruise control system should remain disengaged. Increase vehicle speed to greater than 28 MPH (45 KM/H), and press RESUME/DECEL switch. Cruise control should engage, and vehicle speed should increase to previously set speed.
- On A/T models, put gearshift in Neutral. Cruise control system should disengage.
- On M/T models, press clutch pedal. Cruise control system should disengage. Bring vehicle speed to 50 MPH (80 KM/H). Press clutch pedal, put gearshift lever in Neutral, and release clutch pedal. Press RESUME/DECEL switch. Engine speed should increase to 5000 RPM. Cruise control system should disengage and return engine speed to idle.
- Shift to forward gear. Press RESUME/DECEL switch. Vehicle speed should increase to previously set speed. Press cruise control on/off switch. Cruise control system should disengage and erase previously set speed from memory.