Alternator: Service and Repair

Generator

Service Repair No - 86.10.02

Removal
1. Disconnect battery negative lead.
2. Remove drive belt.
3. Remove cover from rear of generator.
4. Disconnect Lucar from rear of generator and collect cover.
5. Remove 2 nuts securing leads to rear of generator.





6. Disconnect leads from rear of generator.
7. Remove 2 bolts securing generator to mounting bracket and collect nuts.
8. Remove generator.





Installation
1. Install generator to mounting bracket.
2. Install bolts and tighten nuts securing generator to mounting bracket.
3. Connect leads to rear of generator and secure with nuts.
4. Feed lucar through aperture in rear cover and connect to generator.
5. Install cover to rear of generator.
6. Install drive belt.
7. Reconnect battery negative lead.