Control Module: Service and Repair

REMOVAL
1. Position left hand front seat fully up and forward.
2. Disconnect battery negative lead.





3. Remove 2 screws securing heater air duct. Remove duct.
4. Raise carpet and underlay for access.
5. Remove 2 screws securing heater duct mounting. Remove mounting.
6. Remove 2 screws securing ECU.
7. Disconnect multiplug. Remove ECU.

INSTALLATION
8. Position ECU. Connect multiplug. Secure with screws.
9. Position heater duct mounting. Secure with screws.
10. Position underlay and carpet.
11. Position heater air duct. Secure with screws.
12. Reposition front seat.
13. Reconnect battery negative lead.