LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 1997 >> Defender 90 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Drive Cycles >> Drive Cycle: "C"
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycle: "C"

  1. After completing DTC and complaint repairs allow engine to cool. Install Land Rover TestBook or OBD-II scan tool. Turn ignition on for 30 seconds. Ensure Engine Coolant Temperature (ECT) sensor indicates less than 140°F (60°C).
  2. Start engine and allow to idle for 2 minutes. Perform 2 light accelerations from zero to 35 MPH using light pedal pressure and slow to a stop. Perform 2 medium accelerations from zero to 45 MPH using moderate pedal pressure and slow to a stop. Perform 2 hard accelerations from zero to 55 MPH using heavy pedal pressure. When second acceleration cycle is completed, increase vehicle speed to 60 MPH and continue for 5 minutes. Reduce speed to 50 MPH, continue for 5 minutes and slow to a stop.
  3. Allow engine to idle for 2 minutes. Check for DTCs using Land Rover TestBook or OBD-II scan tool. If any DTC is indicated, perform specified repairs. See DIAGNOSTIC TROUBLE CODE IDENTIFICATION  and appropriate DTC testing. If no DTCs are indicated, repair is complete.
scientia non olet · About LEMON Manuals