Garage Menu

Garage menu enables the navigation system to be tested and calibrated, and also contains a route navigation demonstration. The garage menu is entered from the main navigation menu, as follows:

1. Press the Nav button to access the system settings.
2. Press and hold multifunction button 3, then press multifunction button 5 to display the garage menu.

The garage menu contains the following, which can be accessed using the RH rotary control:

• CALIBRATION RIDE  - Used to calibrate the navigation computer, to enable route navigation.
• GPS INFO  - Provides functional test of antenna by checking GPS reception. If functioning correctly, displays the number of satellites being received, the date, time (Greenwich Mean Time) and the type of positional fix currently possible.
• CALIBRATION  - Allows vehicle specific calibration data to be entered, e.g. tire size. Also allows current calibration to be deleted prior to re-calibrating.
  NOTE: Only known calibration data should be entered. The navigation computer cannot make route calculations if incorrect data is entered.
• SENSORS  - Allows wheel speed, reverse gear and gyro sensor inputs to be checked.
• VERSION  - Displays navigation computer hardware and software details.
• SPEECH TEST  - Performs a test of the navigation computer audio output.
• MODULE TEST  - Performs a test routine on the internal components of the navigation computer.
• DEMO  - Allows a route navigation demonstration to be run.

To quit the garage menu, press the Nav button.