Labor Time Change For Abs Modulator Removal And Installation (70/02/06/NAS)

Publication date: 2006-08-25
Reference number: 70/02/06/NAS

LABOR TIME CHANGE FOR ABS MODULATOR REMOVAL AND INSTALLATION

TECHNICAL SERVICE BULLETIN

Reference Number(s): 70/02/06/NAS, Date of Issue: August 25, 2006

LAND ROVER:	Discovery Series II
ISSUE:	1
FGN:	206-09
SECTION:	Brakes
AFFECTED VEHICLES:	Discovery Series II (LT) VIN Range: XA900000 to XA907214; XA200507 to 4A870624

SITUATION

LABOR TIME HAS CHANGED FOR ABS MODULATOR ASSEMBLY REMOVAL AND INSTALLATION

Land Rover engineering has recently studied the service procedures for removing and installing the Anti-Lock Braking System (ABS) modulator assembly on Discovery Series II models. Errors in the original repair time have been corrected to provide a more accurate time allowance. No process changes have been made.

RESOLUTION

INCORPORATE NEW LABOR TIME

Should it become necessary to remove and install an ABS modulator assembly on a Series II Discovery, refer to the REPAIR PROCEDURE detailed in this bulletin to remove and install the ABS modulator assembly.

PARTS INFORMATION

No parts required. Information purposes only.

WARRANTY CLAIMS

NOTE: The SRO 70.65.49 old labor time of 1.40 hours has been superseded by the new labor time of 1.00 hours.
lists additional service operations for Discovery Series II (LT) vehicles, having Rover V8 engines, that now have new labor times as a result of this ABS removal and installation labor time change.
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

WARRANTY CLAIMS

Description	SRO	Old Time (Hours)	New Time (Hours)	Causal Part
Replace ABS modulator	70.65.49	1.40	1.00	As applicable

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

REPLACE ABS MODULATOR ASSEMBLY

NOTE: Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > Service Information/ LT - Discovery Series II / 1999 > Workshop Manuals > Bookmark Section "70 - BRAKES" operation link "70.65.49 Modulator unit - ABS"

Refer to GTR section 70 operation 70.65.49 and remove and install the ABS modulator.

NOTE: lists additional service operations for Discovery Series II (LT) vehicles, having Rover V8 engines, that now have new labor times as a result of this ABS removal and installation labor time change.

DISCOVERY SERIES II (LT) VEHICLES

Discovery Series II (LT) with Rover V8 Engines
Operation Description	SRO	Old Time (Hours)	New Time (Hours)
Replace receiver drier to TXV unit	82.17.10	4.60	4.20
Replace compressor to TXV unit	82.10.53	4.70	4.30
Replace modulator shuttle valve switches	70.65.89/46	1.90	1.50