Steering Wheel: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Land Rover Discovery, 2003 Land Rover Discovery, 2002 Land Rover Discovery, 2001 Land Rover Discovery, and 2000 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Fit horn switches to steering wheel and secure with clips.
- Fit and tighten screw securing horn earth lead to steering wheel.
- Fit cruise control switches to steering wheel and secure with screws.
- Fit radio switches to steering wheel and secure with screws.
- Connect radio and cruise control multiplugs.
- Remove tape from rotary coupler.
- Ensure road wheels are in straight ahead position and indicator cancelling cam are aligned horizontally.
- Fit steering wheel to column.
- Connect horn multiplug.
- Fit and tighten new self-locking nut securing steering wheel to column to 43 Nm (32 ft. lbs.).
- Fit drivers airbag:
- For 1999 models, see DRIVER-SIDE AIR BAG MODULE .
- For 2000 models, see DRIVER-SIDE AIR BAG MODULE .
- For 2001 models, see DRIVER-SIDE AIR BAG MODULE .
- For 2002 models, see DRIVER-SIDE AIR BAG MODULE .
- For 2003 models, see DRIVER-SIDE AIR BAG MODULE .
- For 2004 models, see DRIVER-SIDE AIR BAG MODULE .