LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2000 >> Range Rover Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Vehicle Servicing >> Removal & Installation >> Gear Selector Lever Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Gear Selector Lever Assembly: Removal

  1. Select Park. Remove ignition key. Remove center console. See CENTER CONSOLE  . Remove sound deadener pad. See Figure . Select 1st gear. Disconnect selector cable from lever. Remove "C" clip securing cable outer to gear selector lever bracket. See Figure .
  2. If gear selector lever assembly is to be refitted, mark relationship of lever bracket to transmission tunnel. Disconnect connector. Remove 6 bolts securing gear selector lever assembly to transmission tunnel. Remove gear selector lever assembly. Collect gasket.
scientia non olet · About LEMON Manuals