Radio Operation: Notes
WARNING: This page is about a different car, the 2005 Land Rover Range Rover, 2004 Land Rover Range Rover, 2003 Land Rover Range Rover, and 2002 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
To access the radio functions of the MFD system turn the unit on by pressing the left-hand rotary control, a display appears on the monitor with the available options of the system. Using the rotary controller highlight the radio option and press. This will bring up the radio control screen.
- Name of radio station
- TP station (name of traffic program station selected in background)
- MFD Waveband selected
- P3 positions the radio station (if programmed into the memory)
- RDS (Radio Data System) is switched on, station names are displayed and the strongest frequency on which the station can be picked up is searched for automatically
- Date/time display
- Radio screen display (showing radio stations that are available in the area)
- Regional station function switched on.
If the radio is switched on and on-board computer functions appear on the monitor, the "Audio+OBC" function (on-board computer) is switched on. Switch off the function.
To change the waveband the "AM/FM" button must be pressed. Each time the button is pressed the waveband changes over as follows:
- FM/FMD = VHF (very high frequency)
- AM = MW (medium wave)/SW (short wave)/LW (long wave).