Fuel - Tank: Installation
- Position straps to fuel tank and secure with scrivets.
- Fit charcoal canister to charcoal canister purge solenoid feed pipe to fuel tank.
- Fit vapor separator to fuel tank and secure with 2 scrivets, connect 2 hoses to fuel tank and secure with clips.
- Fit fuel tank breather pipes and charcoal canister vent pipes to clip on fuel tank filler neck.
- Position tank assembly and breather pipes to vehicle.
- With assistance, fit bolts securing fuel tank to body and tighten to 45 Nm (33 ft. lbs).NOTE: Pass vent and breather hoses through body while fitting tank.
- Connect fuel hoses to fuel filter.
- Position fuel filter to mounting brackets and secure with screws.
- Fit fuel tank shields, but do not fit nuts and bolts.
- Connect breather hose to filler neck, fit and secure clip.
- Position fuel tank vent pipe to filler neck.
- Connect fuel tank filler hose to fuel tank filler neck.
- Tighten bolts securing subframe to body to 165 Nm (129 ft. lbs).
- Fit charcoal canister, tighten 2 bolts and connect 3 pipes to charcoal canister.
- Fit bolts and nuts securing fuel tank shields and tighten to 25 Nm (18 ft. lbs).
- Fit fuel tank breather hose to fuel tank filler neck and secure with clip.
- Fit fuel tank breather pipes and charcoal canister vent pipes to clip on fuel tank filler neck.
- Fit securing clip to fuel tank breather hose and charcoal canister vent pipe.
- Fit RH rear wheel arch liner. See 76.10.49 LINER -- REAR WHEEL ARCH -- SINGLE .
- Insert handbrake cables through body.
- Fit rear propeller shaft. See REAR DRIVE SHAFT .
- Fit handbrake cable retaining clip.
- Fit handbrake cables to compensator.
- Fit cable retaining clip to handbrake compensator.
- Fit center console. See 76.25.01 CENTER CONSOLE .
- Connect multiplug to fuel pump.
- Fit RH fuel tank access cover and secure with 4 nuts.
- Fill fuel tank with extracted fuel. See TANK - DRAIN .
- Connect battery earth lead.