LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2004 >> Range Rover Westminster >> Repair and Diagnosis >> Electrical >> Starters >> Removal & Installation >> Air Intake-Plenum >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Air Intake-Plenum: Installation

  1. Install air filter.
  2. Install plenum cover and secure with screws.
  3. Install plenum assembly and tighten nuts to specification. See TORQUE SPECIFICATIONS .
  4. Install positive cable to stud and tighten nut to specification. See TORQUE SPECIFICATIONS .
  5. Install cover.
  6. Install hood sealing rubber to air intake molding.
  7. Connect battery ground lead.
  8. Reconnect support stays and close hood.
scientia non olet · About LEMON Manuals