Procedures

Battery Disconnect/Connect

CAUTION: The vehicle status and battery condition must be established before attempting battery disconnect/connect. Reference must be then made to the following table to establish the relevant procedure to be followed.





Procedure 1

Procedure 1:

Procedure 2

Procedure 2:

NOTE: 1. Disconnect battery - If the remote control is not functioning, it will be necessary to manually unlock the vehicle using the key.

Procedure 3

Procedure 3:

NOTE: 1. Connect battery - If there is insufficient capacity in the battery to disarm the alarm, the alarm may sound on reconnection of the battery - Step 2 will disarm the alarm

Procedure 4

Procedure 4:

Procedure 5

Procedure 5: