Pinpoint Test S: Vehicle Position Does Not Update
- VEHICLE POSITION DOES NOT UPDATE
Check the GPS mark display.
Does the GPS mark display?
YES: Go to step 2.
NO: Carry out the GPS mark display diagnostics. Refer to Pinpoint Test O .
- VEHICLE POSITION DOES NOT UPDATE
Check the map screen scroll function.
Can the map screen be touched scrolled?
YES: Go to step 3.
NO: Check the condition of the map disc (scratches, contamination, deformation, cracks, non-genuine disc etc.).
- VEHICLE POSITION DOES NOT UPDATE
Go to vehicle signal check screen in display diagnostics.
Is the vehicle speed input correctly? Note: MOST and navigation system module speeds are approximately the same.
YES: Suspect the navigation module. Refer to the new module/component installation note at the top of this information.
NO: Go to step 4.
- HARNESS/CONNECTOR CHECKS
Refer to the electrical circuit diagrams and check integrity of navigation module harness and connections.
Has a fault been identified with the navigation module harness or connections?
YES: Rectify the fault and re-test the vehicle.
NO: Install a new navigation module. module