Battery

Specifications






CAUTION: The vehicle status and battery condition must be established before attempting battery disconnect/connect. Reference must be then made to the following table to establish the relevant procedure to be followed.

NOTE:
Vehicles fitted with a fuel fired booster heater will require a 5 minute wait before telestart function will operate. Cycle the ignition off->on->off. Wait 5 minutes to allow fuel fired booster heater to store vehicle configuration parameters.













NOTE:
1. Disconnect battery - If the remote control is not functioning, it will be necessary to manually unlock the vehicle using the key.






NOTE:
1. Connect battery - If there is insufficient capacity in the battery to disarm the alarm, the alarm may sound on reconnection of the battery - Step 2 will disarm the alarm