LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Front Suspension) >> Front Suspension >> Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Suspension: Specifications

WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Gap between underside of the toe link rubber boot and the chassis bracket 12.0 mm (0.473 in)
Height/distance between center of halfshaft and edge of the fender trim 462 mm (18.19 in)
TORQUE SPECIFICATIONS

Description Nm lb-ft
* Stabilizer bar link nuts 175 129
Stabilizer bar clamp nuts 115 85
Front axle crossmember bolts 115 85
Shock absorber and spring assembly to lower arm bolt 300 221
Shock absorber top mounting nuts 70 52
* Shock absorber upper bush rebound plate nut 98 72
Heat shield bolts 10 7
* Upper arm and wheel knuckle nut 70 52
* Tie-rod end ball joint nut 70 52
Brake hose retaining bracket to wheel knuckle bolt 25 18
*+ Halfshaft retaining nut 230 169
Brake hose to upper arm bolt 22 16
Upper arm nuts and bolts 175 129
Radiator access panel bolts 10 7
Wheel hub bolts 115 85
Brake disc dust shield bolts 10 7
Lower arm bolts 275 203
Lower arm ball joint retaining nut 115 85
Lower arm front camber adjusting bolt 275 203
Lower arm rear castor adjusting bolts 275 203
Toe link inner ball joint retaining nut 133 98
Rear camber adjusting bolts 133 98
Track rod end locking nuts 53 39
Wheel speed sensor bolt 10 7
Axle carrier bushing bolt - M14 105 77
Axle carrier bracket bolts 80 59
Road wheel nuts 140 103

* New nut/bolts must be installed 

+ Stake nut on completion