LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Front Drive Axle/Differential) >> Front Drive Axle/Differential >> In-Vehicle Procedures >> Axle Tube >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Axle Tube: Installation

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the axle tube.
    • Clean the component mating faces.
    • Early models: Install a new O-ring seal.
    • Later models: Apply sealant to the mating face. See Specifications .
    • Tighten the 4 axle tube bolts to 50 Nm (37 lb.ft).
    • Tighten the axle tube bushing bolt to 63 Nm (46 lb.ft).
  2. Install the RH halfshaft. Refer to Front Halfshaft RH article.
scientia non olet · About LEMON Manuals