Speed Control Sensor: Removal
WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable. Refer to Specifications .
- Raise and support the vehicle.
- Refer to Front Bumper Cover .
- Speed Control Sensor Adjustment.
- See figure
- Torque: 5
- Torque: 5
WARNING:
Make sure to support the vehicle with axle stands.
NOTE:
Do not disassemble further if the component is removed for access only.