LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR2 Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Climate Control >> Removal And Installation >> Air Conditioning (A/C) Compressor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Conditioning (A/C) Compressor: Installation

  1. Install the A/C compressor.

    Torque: 25 Nm

    2. CAUTION: Lubricate the new seals with clean refrigerant oil.
  2. Connect the A/C compressor refrigerant lines.

    Torque: 24 Nm

  3. Install the accessory drive belt.
  4. Install the A/C compressor, lower support bracket.

    Torque: 25 Nm

  5. Install the A/C compressor, upper support bracket.

    Torques:

    M10: 45 Nm

    M8: 25 Nm

    M6: 10 Nm

  6. Install the air cleaner assembly. Refer to AIR CLEANER .
  7. Install the battery tray. Refer to BATTERY TRAY .
  8. Recharge the A/C system. Refer to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
  9. Install the engine cover. Refer to ENGINE COVER - 3.2L .
  10. Connect the battery ground cable and install the cover. Refer to SPECIFICATIONS .
scientia non olet · About LEMON Manuals