Control Diagram
WARNING: This page is about a different car, the 2010 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A
= Hardwired connections; D
= High speed controller area network (CAN) bus; N
= Medium speed controller area network (CAN) bus
| Item Number | Description |
|---|---|
| 1 | Face and feet distribution motor |
| 2 | LH temperature blend motor |
| 3 | Recirculation motor |
| 4 | Windshield distribution motor |
| 5 | RH temperature blend motor |
| 6 | A/C compressor solenoid valve |
| 7 | Sunlight sensor |
| 8 | Pollution sensor |
| 9 | Refrigerant pressure sensor |
| 10 | In-vehicle temperature sensor (all except Japan) or in-vehicle temperature and humidity sensor (Japan only) |
| 11 | Ambient air temperature sensor |
| 12 | Evaporator temperature sensor |
| 13 | ATC module |
| 14 | ECM |
| 15 | ECT sensor |
| 16 | Instrument cluster |
| 17 | Blower control module |
| 18 | BJB (battery junction box) |
| 19 | CJB |
| 20 | Blower |
| 21 | Center instrument panel switch pack |