Traffic Sign Recognition Speed Alert Menu Setting (LTB00653NAS1)
Publication date: 2014-05-12Reference number: LTB00653NAS1
TRAFFIC SIGN RECOGNITION SPEED ALERT MENU SETTING
TECHNICAL SERVICE BULLETIN
Reference Number(s): LTB00653NAS1, Date of Issue:
May 12, 2014
| LAND ROVER: | 2014 Rover Sport (LW), Range Rover (LG) |
| SECTION: | 413-01 |
| AFFECTED VEHICLES: | Rover Sport (LW) Model Year: 2014 VIN: EA339983-EA350915; Range Rover (LG) Model Year: 2014 VIN: EA152794-EA158978 |
MARKETS
NAS
CONDITION SUMMARY
Situation: The traffic sign recognition Speed Alert menu may not recall the user settings when the engine ignition is switched OFF and defaults to the off position.
Cause: This may be caused by a software issue within the Instrument Cluster.
Action: Should a customer express this concern, follow the Service Instruction outlined below.
PARTS
No Parts Required
TOOLS
NOTE:
This is an 'Active Bulletin' that will display a functional programming shortcut if accessed within a diagnostic session using SDD.
SDD with latest DVD and Calibration File; first available on DVD137.01 v.163
Jaguar Land Rover-approved Midtronics battery power supply
WARRANTY
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.
NOTE:
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
| DESCRIPTION | SRO | TIME (HOURS) | CONDITION CODE | CAUSAL PART |
|---|---|---|---|---|
| Update Instrument Cluster software - Range Rover Sport (L494) | 88.90.34 | 0.9 | 42 | LR054144 |
| Update Instrument Cluster software - Range Rover (L405) | 88.90.03 | 0.9 | 42 | LR054144 |
NOTE:
Normal Warranty policies and procedures apply.
SERVICE INSTRUCTION
CAUTION:
A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during SDD diagnosis/module programming.
CAUTION:
Ensure all ignition 'ON'/ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
NOTE:
SDD must be loaded with DVD137.01 v.163 or later.
- Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
- Turn ignition 'ON' (engine not running).
- Connect the Symptom Driven Diagnostics (SDD) system to the vehicle and begin a new session.
- Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data collect sequence.
- Select 'Diagnosis' from the Session Type screen.
- Select the 'Selected Symptoms' tab, and then select:
- Electrical > Driving aids > Traffic sign recognition
- Select 'continue'.
- Select the 'Recommendations' tab, and then select 'Run' to perform the 'Configure existing module - Instrument cluster control module' option.
- Follow all on-screen instructions to complete this task.
- Exit the current session.
- Disconnect the SDD and the battery power supply from the vehicle.